Denon AVR-4810CI 220 Volts Reciever Amplifier amp
- 140 watts per channel x 9 channels 8 ohms
- Dolby TrueHD, Dolby Digital Plus, Dolby Digital Surround EX, Dolby Pro Logic IIz decoding
- DTS-HD Master Audio, DTS-HD High Resolution, DTS ES 6.1 Discrete, DTS ES 6.1 Matrix, DTS Neo:6 decoding
- Multi-mono Block amp configuration with Free Assign amp configuration flexibility
- Anchor Bay ABT-2010 advanced analog and digital video 1080p/24fps/60fps upconversion and deinterlacing with multi-cadence detection
- Audyssey Dynamic Sound Expansion with front height and/or expanded width channels, with maximum 11.3 channel capability
- Audyssey MultEQ XT, Dynamic Volume, Dynamic EQ; Audyssey Pro Installer ready
- HD Radio AM/FM tuner; XM and Sirius satellite radio ready
- Six HDMI inputs, dual HDMI video outputs
Once again, Denon advances the state-of-the-art in home theater surround sound with the AVR-4810CI, with nine on-board amplifier channels each rated at a robust 140 watts. The multi-mono block amp construction ensures top audio fidelity, and the Free Assign amp configuration function allows maximum system configuration flexibility. Equipped with the latest high resolution audio decoders including Dolby TrueHD and DTS HD Master Audio, the AVR-4810CI also features Dolby Pro Logic IIz, which derives additional front height channels. The AVR-4810CI also features a full suite of advanced Audyssey sound processing functions, including MultEQ XT eight point room acoustic measurement and correction, Dynamic Volume and Dynamic EQ, as well as the latest DSX decoder, which provides additional expanded front width and/or height channels. Any video signal, analog or digital, can be upscaled to 1080p HDMI output via Anchor Bay" advanced VRS processing, and the AVR-4810CI includes vertical stretch mode for anamorphic 2.40:1 widescreen projection. The AVR-4810CI also features extensive audio and video connectivity, including six HDMI and three component video inputs. The dual AM/FM tuner section includes HD Radio, and the AVR-4810CI features XM and Sirius satellite radio options.
This Denon Home Theater receiver is 220 volts, 230 volts, and 240 volts compatible for world wide use. It will work anywhere in the world with Pal, NTSC or Secam video signals.
-
Works in Europe, Asia, Middle East, Africe, South America and other countries with 220 volts, 230 volts or 240 volts power
-
To use in North America with 110 volts power a Deluxe voltage converter is required.
-
Pal / Secam / NTSC support
-
50hz and 60hz support
-
HDMI Input and Output
Denon AVR-4810 Home Theater Audio Video Receiver 220 volts, 230 volts, 240 volts
Works with 220 volts, 240 volts, 50hz, 60hz, pal, ntsc, secam.
Denon AVR-4810CI 7.1 Channel Home Theater Receiver (BLACK) 220 - 240 volts
PAL & NTSC compatible
Denon 9.3 Channel Home Theater Black Receiver - AVR-4810CI
surround sound with the AVR-4810CI, with nine on-board amplifier channels each rated at a robust 140 watts. The multi-mono block amp construction ensures top audio fidelity, and the Free Assign amp configuration function allows maximum system configuration flexibility. Equipped with the latest high resolution audio decoders including Dolby TrueHD and DTS HD Master Audio, the AVR-4810CI also features Dolby Pro Logic IIz, which derives additional front height channels. The AVR-4810CI also features a full suite of advanced Audyssey sound processing functions, including MultEQ XT eight point room acoustic measurement and correction, Dynamic Volume and Dynamic EQ, as well as the latest DSX decoder, which provides additional expanded front width and/or height channels. Any video signal, analog or digital, can be upscaled to 1080p HDMI output via Anchor Bay"s advanced VRS processing, and the AVR-4810CI includes vertical stretch mode for anamorphic 2.40:1 widescreen projection. The AVR-4810CI also features extensive audio and video connectivity, including six HDMI and three component video inputs. The dual AM/FM tuner section includes HD Radio, and the AVR-4810CI features XM and Sirius satellite radio options.
General
Power Output; Watts Per Channel: 140
All Channels Rated @ 0.05 THD
Sound Modes
Processor(s) - Bit Depth and Type: 21367 x 3 32-bit Floating Point
Dolby Pro Logic IIx - with Cinema, Music, Game Modes: Dolby PLIIz
Dolby Digital Plus
Dolby Digital Surround EX Decoding
Dolby Digital Pro Logic II: Dolby PLIIz
dts ES Discrete 6.1 Decoding
dts ES Matrix 6.1 Decoding
dts Neo:6 Stereo-to-Surround Cinema and Music Modes
dts 96/24 5.1 for DVD-Video Processing
Dolby Headphone
HDCD Decoder
Audio Signal Delay (Sync. Audio with Video signal) - By source
Pure Direct/Direct/Stereo Modes on Digital/Analog inputs
Stereo/Direct Modes w/Pure Analog Path
Video Game Mode
Wide Screen 7.1 Mode
Mono Movie Surround Mode
Rock Arena Surround Mode
Matrix Surround Mode
Jazz Club Surround Mode
Virtual Surround Mode - For 2 Speakers/Headphones
Multi-Channel Stereo Mode: 5/6/7
DSP Effect Modes: 10
Auto Surround Mode (Analog or Digital Input Type)
Active Center Channel In All Surround Modes
Dynamic Discrete Surround Circuit - Digital HD
Dolby TrueHD and Dolby Digital+
dts-HD Master Audio
MP3 Decoding
WMA Decoding
HD Radio
Neural Surround Mode XMHD
Connectivity
True 24-bit/192-kHz Digital Input Capability (Denon Link & 1394): DL4th & HDMI
Assignable Digital Inputs: 6
Digital Input - DENON Link 3rd (SACD Ready): Denon Link 4th w/Flow Control
Digital Inputs: Coaxial: 3
Digital Inputs: Optical: 3 (Incl. Front)
Digital Outputs: Optical: 2
Digital to Analog REC Out
Analog Audio Inputs, Incl. Tuner: 10 Incl. Sirius Radio
Phono Input: MM type
Source Function Renaming
Analog Record Outputs: 2
Video Conversion -Composite to S-Video to Component
Video Conversion - Analog to HDMI
Composite Video Inputs: 7
Composite Video Outputs: 4
S-Video Inputs: 7
S-Video Outputs: 3
Component Video Inputs x Bandwidth - *Assignable: *3 x 100 MHz
Component Video Outputs: 2 - 1 Main Zone, 1 Second Zone
8-Ch. External Analog Input
Banana Plug Speaker Terminals, All Channels
Cinema EQ
56 Station Auto-Preset Memory Tuning
Sirius Ready
Rhapsody
Direct Function (Tone Bypass)
Volume Control Un-muting
Selectable Muting Levels (Full/-40/-20)
Video Select Control
RS-232 Port - Third Party Remote Controllers
RJ-45 Ethernet Port - Same Functionality as AVR-5805/4806: Network A/V Streaming; DLNA Certified; Remote Maintenance; 3rd Party Controllers; Internet Radio
PC Setup and Control Capability: via Ethernet/Web Browser
IR Serial Remote In/Out terminals
+12v Trigger Output - Assignable: 2 x 150 mA
Multi-Source/Multi-Zone (*Uses REC OUT): 4 Source/4 Zone Audio (Z4 Digital); 2 Source/2 Zone Video
Pre-amp Outputs for Multi-Zone
High Pass Filter for Multi-Zone Outputs
Multi-Zone Pre-Amp Outputs - Selectable Output Levels
Discrete Multi-Zone Composite Video Output - *S-Video also
Discrete Remote Power On/Off, Source Selection and Volume for Main and Second/Third* Zones
Assignable Amplifier Configuration of Surround Back Channels
Speaker Time-Delay and Level Controls: L/R, Sub, C, Surr. L/R, Surround Back
Pre-Amp Outputs: 12
Internet Radio
iPod Dock Control Port (Using optional ASD-1R Denon iDock): ASD-1R/11R/3N/3W
USB Flash Drive Port: Flash/HDD/iPod
Pre Labled Assignable Digital Inputs
Digital to Analog Conversion Multi Zone Outputs
Input Delete Function
Front Panel AV Inputs Inside Panel Composite & S-Video: * with Optical in
S-Video Down Conversion 2nd Zone
Video Conversion Analog to HDMI Scaling 480p 720p 1080i 1080p
HDMI 1.3a Inputs: 1 Front/5 Back with 7.1 Uncompressed 24/96 Audio
HDMI 1.3a Outputs: 2
HDMI Audio/Video Repeater Function
HDMI Deep Color Support-36Bit
HDMI xvYCC Color Space Support
HDMI SACD Support
Component Video Output 2nd Zone
Enhanced Power Amp Assignment
Builtin WiFi Connectivity WiFi B/G certified
Network Enabled
Component Technology
Equal Power Amplifiers: Y/9 ch
Low Impedance Drive Capability
High-Current/Discrete Amplifiers
Independent Power Supplies
24-bit/192-kHz DACs - Burr-Brown: PCM-1791 PCM-1791A - 12 channels
Analog-to-Digital Conversion - Bit Depth/Sampling Rate: 24-bit/96-kHz Burr-Brown PCM-1804
Variable High/Low Pass Crossover Points (12/24dB) 40/60/80/100/120/150/200/250
Built In Time Based Correction
Advanced AL24 Processing Multi Channel
Automatic Lip Sync
HD Radio Tuner Built-in
Convenience
Auto Setup Calibration
Auto/Manual Room Equalization
Audyssey MultEqxt Room Eq. with up to eight position setup
Audyssey MultEQ
Audyssey Dynamic Volume
Auto Setup Microphone Included/Type: Y/Mold DM-A409
Icon-Based On-Screen Display: Zone 2
Front Panel System Setup Control
Personal Memory Plus
System Setup/Surround Parameters Lockout
Relay-Controlled Protection Circuits
Microprocessor User Re-set: Y/p.134
Detachable Power Cord
Pre-programmed/Learning EL Remote with Backlighting and Punch Through Commands: Y/RC-1126 + Multi-zone remote RC-1121
Audyssey Mult EQ Room Correction Positions
Audyssey Mult EQ Pro CalibrationCompatible/Installer Ready
GUI Menu Support
Approximate Dimensions:
Height: 7.7"
Width: 17.1"
Depth: 16.7"
Approximate Weight:
Unit: 42.2 lbs
Shipping: 47 lbs