Denon DVD-2910 Region Free DVD Player

$599.00
Out of stock
SKU
DEN-2910

This item is discontinued.

See Our Full Selection of Region Free DVD Players

  • Modified for Code Free, will play any DVD on a (NTSC USA Standard) TV
  • Plays DVD-Video, DVD-R & DVD-RW, DVD+R & DVD+RW, Video CD, SACD, DVD-Audio, CD, CD-R & CD-RW, MP3 and WMA CD-R & CD-RW
  • HDMI, DVI and component output for 480i, 480p, 720p & 1080i video output resolution with upconversion
  • DCDi Progressive Scan By Faroudja
  • PLAY ANY REGION DVD ON A STANDARD TV IN THE USA WITH NO ADDITIONAL EQUIPMENT
  • Outperforms ALL OTHER PLAYERS IN SIMILAR PRICE RANGE!!!!
  • TRUE CORLORSTREAM HARDWARE PROGRESSIVE SCAN, 3/2 Pull Down
  • Plays Pal 16:9 anamorphic discs on an NTSC TV with no problem. Perfect Pal -> NTSC conversion
Special Discount! Save 5%!
Use Promo Code 5OFFBFS At Checkout!

Denon 2910 Region Free DVD Player

Finally a Highend dvd player with HDMI & DVI outpus, upconversion, to fit into any state of the art home theater system! By combining HDMI and DVI technology with high-resolution audio and video, Denon has created the Ultimate Center the any high end entertainment center.

The DVD-2910's Digital Visual Interface (DVI) output uses advanced video processing and video upconversion to create stunning, HD-compatible 720p or 1080i pictures from standard DVDs. Using the High-Definition Multimedia Interface (HDMI) output, you'll enjoy the added convenience of streaming upconverted video and digital audio signals together on one cable.

Key Features

  • Code Free DVD player will play region 1,2,3,4,5,6 or any other region dvd movies
  • plays DVD-Video, DVD-R & DVD-RW, DVD+R & DVD+RW, and Video CD
  • BUILT IN 16 MB PAL <-> NTSC VIDEO CONVERTER Play any DVD on ANY TV
  • plays SACD, DVD-Audio, CD, CD-R & CD-RW, MP3 and WMA CD-R & CD-RW
  • plays digital photo CDs (JPEG)
  • HDMI interface with multichannel audio & DVI digital video output with HDCP copy protection (selectable 480p, 720p, 1080i output)
  • Dual, discrete Analog Devices ADV-7310 216MHz/12-bit video DACs (one for progressive-scan and one for interlaced video)
  • Faroudja DCDi progressive-scan mode for smoother video with HD-compatible TVs (via the component video output)
  • Pure Direct mode
  • digital bass management
  • 8MB video buffer for quick layer change
  • optical and coaxial digital outputs for Dolby(R) Digital/DTS(R)/PCM (96kHz/24-bit capable)
  • 192kHz/24-bit Burr-Brown DSD-1791 audio DACs
  • HDCD(R) decoding
  • remote control
  • 17-1/8"W x 4"H x 12-1/2"D

General Features

Multi-Format Player:

The Denon DVD-2910 is a "universal" player, which offers playback of both ultra high-resolution multi-channel audio formats: DVD-Audio and SACD (Super Audio Compact Disc). Both formats, with their wide frequency responses, capture subtle details that make music sound richer and more real.

Disc Compatibility:

This unit can play the following types of discs: DVD-Video, DVD-Audio, Video CD, Audio CD, and Super Audio CD (SACD). In addition, this unit is compatible with CD-R, CD-RW, DVD-R, and DVD-RW discs, as well as MP3, WMA, and JPEG files recorded on CD-R, CD-RW or CD-ROM discs. According to the manufacturer, this unit can also play DVD+R and DVD+RW discs, although compatibility with these discs is not mentioned in the manual.

Dual Discrete Video Circuit:

The DVD-2910 uses dual 12-bit 216 MHz video D/A converters to ensure highly accurate playback of delicate, low-level video signals and give you a vivid picture that is faithful in every detail. One D/A converter is used to process Progressive signals and one is used for Interlaced signals to eliminate mutual interference between the two types of signals.

Audio Processing:

This unit uses 24-bit, 192 kHz audio D/A converters that are well protected from noise caused by fluctuations in current from the power supply. It has built-in Dolby Digital and DTS decoders along with a 5.1-channel analog output.

High-End Digital Outputs:

This unit can be connected to another compatible component using a single cable for high quality digital images and sound with little transfer loss:

Denon Link:

This terminal can be used for digital audio transfer of DVD-Video signals, as well as multi-channel audio signals of DVD-Audio. (Compatible only with Denon receivers with Denon Link connectors, such as AVR-5803 and AVR-3805)

IEEE 1394:

This terminal can digitally transfer audio signals from DVD-Video, DVD-Audio, and Super Audio CD, and other multi-channel audio signals.

HDMI:

This terminal can transfer digital video and digital audio signals from DVD-Video and DVD-Audio signals.

Black Level:

When the HDMI or DVI-D outputs are used, you can set the black level to Normal (within a range of 16 to 235) or Enhanced (within a range of 0 to 246).

Picture Quality Adjustments:

The DVD-2910 allows you to select a Standard picture quality setting (default settings) or customize the settings and save them in one of five image quality memories (M1-M5). Custom settings include adjustments for contrast, brightness, sharpness (mid and high), hue, CCS, white level, chroma level, chroma delay, DNR, vertical enhancer, horizontal enhancer, gamma, setup level, horizontal position, and vertical position.

Digital Audio Output Capabilities:

When playing copyright-protected linear PCM or packed PCM DVDs, no digital signals are output for sources exceeding 48kHz/16-bits. When making digital connections to a receiver that is not compatible with 96kHz/88kHz signals, you can set the unit to output the signal as 44.1kHz or 48kHz LPCM.

SRS TruSurround:

The multi-channel sound normally achieved with five speakers is recreated using only two front stereo speakers. This results in a sound with a nearly natural sense of movement that seems to surround the head, without the strong directivity characteristic of multi-speaker system. TruSurround only works for DVD-Video and Video CDs.

Video Scaler:

This unit features a built-in high quality video scaler that is capable of outputting video signals in a variety of customizable HD formats. You can select in the Video Setup menu to output the image from the HDMI and DVI-D connectors as 480p/576p, 720p, or 1080i.

MP3/WMA Playback:

This unit will play MP3 and WMA files recorded onto CD-R and CD-RW discs using the ISO 9660 Level 1 format. It is recommended that MP3s be recorded with bit rates of 128 kbps or higher, and WMA files at bit rates of 64 to 160 kbps. The player can recognize up to 600 files. This unit is not compatible with ID3 tags.

JPEG Playback:

This unit will play JPEG still image files recorded onto CD-R and CD-RW discs using the ISO 9660 Level 1 format. This unit can recognize baseline JPEG files of less than 30MB. JPEG files can be displayed one at a time, or in a slideshow fashion.

Resume Play Function:

This function allows you to resume DVD playback at the point where it left off the last time you stopped playback. The resume function is cleared by pressing the stop button twice, opening the disc drawer, adjusting the Parental Lock function, or removing power from the unit. This feature only works with discs that have elapsed time information.

Slow Motion Speeds:

When playing a DVD-Video disc, you may move forward or backward through the program in one of four slow-motion speeds (1/8x, 1/6x, 1/4x and 1/2x). When playing a Video CD, you may move forward only through the program in one of four slow-motion speeds. No sound is output during slow-motion play.

Scanning Speeds:

There are seven fast forward and reverse speeds for DVD-Video and DVD-Audio discs (2x, 4x, 6x, 8x, 16x, 32x, and 64x) and four for SACD, Video CD, and CD (2x, 4x, 6x, and 8x).

Program Playback:

You can create a playlist of tracks from DVD-Audio, Video CD, SACD, and Audio CD of up to 20 steps. The playlist is deleted when the unit is turned off or the disc is ejected.

Bookmarks:

You can bookmark up to 5 scenes you want to see again so you can start playback from the marked position whenever you want. The marks are cleared when the disc is ejected or the unit is turned off.

Ratings (Parental Control):

This unit allows you to set playback restrictions for DVDs using the Ratings feature. You can select a parental control rating level from 0 (lock all) to 8 (No Limit), which is protected by a 4-digit password.

Display Dimming:

The unit's display can be adjusted in 4 steps from All Off to Always On.

Remote Control (RC-972):

The supplied remote is programmed to operate this unit only. A backlight button supplies illumination for the disc transport buttons only (play, pause, stop, etc).

Inputs and Outputs Notes

5.1-Channel Audio Outputs:

The DVD-2910 offers multi-channel analog output for DVD-Audio, DVD-Video and SACD playback.

2-Channel Audio Outputs:

In addition to the 5.1-channel analog outputs, the unit features a stereo audio output for connecting to a stereo analog input on a TV or receiver. Even when the source audio is multi-channel (Dolby Digital, DTS, DVD-Audio, SACD), these jacks will output a downmixed 2-channel signal.

DVI-D Output:

The DVD-2910 has a 24-pin DVI-D jack for connecting a compatible TV or monitor. Using the DVI setup menu, you can choose to output the signal as 1080i, 720p, or 480p. A separate audio connection must be made because the DVI-D connection does not pass audio signals.

HDMI (High Definition Multimedia Interface):

The unit's HDMI simplifies A/V connections by carrying uncompressed SD or HD digital video and up to 8 channels of digital audio all in one cable. This unit features HDCP copyright protection technology, and must be connected to an HDCP-compliant device. The output resolution can be set to match the capability of the monitor or projector. The HDMI connection is compatible with DVD-Video and DVD-Audio, but not SACD. The video signal format can be set to 480p, 720p or 1080i.

Note on DVI-D and HDMI:

On the front panel, you can select one of following outputs: "HDMI Y Cb Cr", "HDMI RGB", "DVI", or "HDMI/DVI Off". Once you have chosen the output, you can then select the video signal format: 480p/576p, 720p or 1080i.

Digital Audio Outputs:

This unit features two digital audio outputs, one optical and one coaxial connection. These can be connected to a A/V receiver, amplifier, surround decoder (Dolby Digital, DTS), or other component.

Component Video Output:

The DVD-2910 features a component video outputs, capable of passing a progressive scan signal or an interlaced video signal.

Composite/S-Video:

For connecting to TVs with only composite or S-Video inputs, this unit provides one composite video and one S-Video output jack.
 
© 1997-2022 All Rights Reserved 220-Electronics.com (International Video & Electronics)