Denon AVR-3311 220-240 volts Receiver
This item is Discontinued,
The New Replacement is Now Available Denon AVR-3313
Some of Our Most Popular International Electronics Categories
Denon AVR-3311 220-240 volts Receiver
-
Works anywhere in the world.
-
Pal / Secam / NTSC support
-
50hz and 60hz support
-
HDMI Input and Output
Denon AVR-3311 Home Theater Audio Video Receiver 220 volts, 230 volts, 240 volts
Via the RJ-45 wired LAN connection to your broadband home network, the AVR-3311CI opens up a whole world of content choices, including subscription music services Rhapsody and Napster, internet radio via Pandora, photo viewing via flickr, and access to photos, and music tracks on your DLNA-compatible multi-media home PC. That LAN connection also allows for web control, and there’s also an RS-232C serial port for custom integration with 3rd party whole home control systems.
Equipped With The Latest Surround Sound Decoders
The AVR-3311CI features high resolution audio decoders, including Dolby TrueHD and DTS-HD Master Audio. It also comes equipped with Audyssey’s new DSX surround processor, which derives front height or front width channels for a dramatically expanded front soundstage. The Power Amp Assign function lets you specify the precise amplifier and speaker configuration that’s right for your home theater setup.
Easy Setup With Automatic Room Acoustic Correction
Audyssey MultEQ XT room acoustic correction system features a microphone (included) to automatically measure the speaker configuration and provide acoustic tailoring for the best surround sound experience, and provides quick and easy setup. Dynamic Volume minimizes jarring volume jumps during commercial breaks, and Dynamic EQ provides a natural tonal balance even at very low volume levels.
HDMI 1.4a Includes 3D Blu-ray Compatibility
Featuring 6 HDMI inputs, the AVR-311CI is also equipped with Denon’s high resolution video processor, which accepts standard definition video sources and upconverts them to HDMI. The latest HDMI 1.4a standard is supported, which provides 3D pass-through (Broadcast and Blu-ray), and also supports Audio Return Channel. The HDMI upconversion allows for a single HDMI cable run to the TV, avoiding the expense and hassle of multiple cable runs. One of the six HDMI inputs is conveniently located behind the front panel flip-down door, and there are two HDMI outputs, allowing the use of a home theater front projector as well as a flat panel HDTV.
Quality Discrete Power Amplifier Section
The equal power amp design features 7 discrete power amp circuits, and each channel is rated at 125 watts (8 ohms, 20 Hz to 20 kHz, .05% THD). For configuration flexibility, Denon’s Power Amp Assign function lets you use 2 of the amp channels for surround back speakers, or front height effects speakers, or they can be assigned for second and third zone multi-room speakers.
- Featuring 3D pass-through technology
- HDMI 1.4a with 3D
- Audio Return Channel
- Deep Color
- “x.v.Color”
- Auto Lipsync
- HDMI control function
- 6 x HDMI inputs
- 2 x HDMI outputs (selectable not simultaneous)
- GUI (Graphical User Interface)
- One-cable HD solution
- All sources are up-scaled to 1080P
- Latest Anchor Bay ABT2015 Hi Bit video processing
- Video de interlacing and scaling on both analogue and HDMI sources
- High definition audio support, Dolby TrueHD and dts-HD Master Audio
- Supports Dolby Pro Logic IIz processing
- Fully discrete amplification
- Identical quality and power for all 7 channels
- Stable power supply for high-quality sound and picture playback
- Dynamic Discrete Surround Circuit, D.D.S.C.-HD
- Audyssey MultEQ XT and Auto Setup
- Audyssey Dynamic Volume, for real-time volume adjustment
- Audyssey Dynamic EQ
- Audyssey DSX Processing
- Direct play for iPod® and iPhone® via USB
- Compressed Audio restorer for improved MP3 & iPod playback
- Enhanced network capability
- Internet Radio
- DLNA Network audio/photo streaming via Ethernet
- Supports flickr
- Party Mode Plus’
- FLAC HD, High-resolution audio format
- Compatible with Windows® 7
- Web interface for web control and setup
- Newly developed pre memory remote control handset with Glo-Key
- Remote Setup Guidance
- 3 source / 3 zone capability
- iPod and iPhone playback for Zone 2 / Zone 3
- Power Amp Assign function
- 2-line fluorescent display on front panel
- Sleep timer function
- RS232, Control4, AMX, Crestron third party control support
- PC and iPhone control via Ethernet
- Lower power consumption at stand-by 0.1 W (Standby)
- 3 Quick Select buttons
- Auto surround mode
- Sleep timer function
- Audio Delay function (max. 6 frames or 200 msec)
- Muting level settings (Full/-40dB/-20dB)
- Audio level memory, capable of correcting different signal levels for each input device
- Dual subwoofers preout
- Variable subwoofer crossover switching
- 150 mA Trigger output
- IP Control
- Audyssey installer Program Ready
- IR Remote in/out ports
- Main Specifications
- Power amplifier section
- Rated output *THD figures are power amp stage values.
- Front L/R
- 125 W + 125 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
- 165 W + 165 W (6 ohms, 1 kHz, THD 0.7%)
- Centre
- 125 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
- 165 W (6 ohms, 1 kHz, THD 0.7%)
- Surround L/R
- 125 W + 125 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
- 165 W + 165 W (6 ohms, 1 kHz, THD 0.7%)
- Surround Back L/R
- 125 W + 125 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
- 165 W + 165 W (6 ohms, 1 kHz, THD 0.7%)
- Front L/R
- General
- Power supply
- AC 230 V, 50 Hz
- Power consumption
- 670 W (Standby 0.1 W)
- Dimensions
- (W x H x D) 434 x 171 x 381 mm
- Weight
- 12.2 kg
- Power supply
|